• 21b03dfef88105133d8d396c2c9a98b0
1

3DXTECH

3DXTECH ThermaX™ PSU 2.85mm/500g

Regular price
RM 546.34
Sale price
RM 546.34
Regular price
RM 910.56
TDS & SDS Available | RF SOLUTIONS ENTERPRISE E-STORE
TDS & SDS Available
Member Discount | RF SOLUTIONS ENTERPRISE E-STORE
Member Discount
Business Bulk Purchase | RF SOLUTIONS ENTERPRISE E-STORE
Business Bulk Purchase
【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉ThermaX™ PSU 3D Printing Filament
Polysulfone (PSU) is a high-temperature aromatic sulfone polymer. PSU has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, food service, industrial, plumbing, medical, semi-con applications.

PSU is an excellent alternative to ULTEM™ 9085.
While having a lower cost per kilogram and lower density (giving you more filament per kilogram as well), it maintains superior thermal properties. Its higher Tg and HDT give it higher strength and stiffness at elevated temperatures.

👉Benefits of ThermaX™ PSU:
Very high thermal properties superior to Ultem™ 9085
Excellent hydrolytic resistance
High Environmental Stress Crack Resistance (ESCR)
Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization
Exceptional strength and modulus, even at elevated temperatures
Outstanding impact resistance
Highly resistant to even large (10 Mrd) doses of gamma radiation
Resists most common automotive fluids including gasoline, antifreeze, transmission fluids, motor oils, power steering fluid, windshield washer fluid (ESCR, 24 hrs, 100°C)
Inherently flame retardant with low smoke evolution and low smoke toxicity
Excellent dimensional stability with low creep sensitivity, low and uniform coefficient of thermal expansion, and highly reproducible part-to-part dimensions.

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
1.24g/cm3 density

👉Recommended Print Settings:
Extruder: 350-380°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive and 3DXTECH Polyimide Tape work best for us.
Heated Chamber: Recommended
Supports: ThermaX™ HTS High-Temp Support is designed specifically to work with high-temp materials like this one.
Other: No cooling fan and print speeds of 16 mm/s as a starting point.
Drying Instructions: 120°C for 4 hours.
ULTEM™ is a registered trademark of Sabic Innovative Plastics.


---Authorized 3DXTECH Reseller & Distributor---