• 60d826ed32483ca1984377a83e438f53
1

3DXTECH

3DXTECH ThermaX™ ULTEM 9085 2.85mm/500g

Regular price
RM 657.22
Sale price
RM 657.22
Regular price
RM 1,095.36
TDS & SDS Available | RF SOLUTIONS ENTERPRISE E-STORE
TDS & SDS Available
Member Discount | RF SOLUTIONS ENTERPRISE E-STORE
Member Discount
Business Bulk Purchase | RF SOLUTIONS ENTERPRISE E-STORE
Business Bulk Purchase
【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉ThermaX™ PEI 3D Printing Filament, Made Using ULTEM™ 9085 PEI
We manufacture this ultra-performance 3D printing filament using ULTEM 9085 PEI (polyether imide) resin from Sabic. Filaments made from ULTEM 9085 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 186°C.


👉Benefits of PEI 9085 Include:
High thermal properties, with a Tg of 186°C
Inherently flame-resistant with low smoke evolution and low smoke toxicity
Long-term hydrolytic stability
Excellent dimensional stability, low heat creep sensitivity, and a very low, uniform coefficient of thermal expansion create highly reproducible part-to-part dimensions
Exceptional strength and modulus, even at elevated temperatures
Good resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies

👉Annealing 3D Printed Parts:
If needed, parts printed using ULTEM may be annealed in a hot-air oven to reduce any printed-in stresses which may be present in the part. Printed-in stresses may occur in any plastic and may result in lower than expected mechanical properties. If this is an issue with your part, you can follow the simple 5-step ramp up/down process for annealing the ULTEM parts.

Step 1: Place printed parts in cool, room-temp oven.
Step 2. Set temp to 250°F and allow to stabilize for 1 hour.
Step 3: After 1 hour at 250°F, increase oven temp to 300°F and allow to stabilize 1 additional hour.
Step 4: After 1 hour at 300°F, reduce heat back to 200°F and allow to stabilize for 30 minutes.
Step 5: After 30 minutes, turn off oven heat and allow printed parts to return to room temp inside the oven as it cools.
ULTEM™ is a registered trademark of Sabic Innovative Plastics.

3DXTECH manufactures this filament using ULTEM™ 9085 PEI resin.

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 350-380°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive or 3DXTECH Polyimide Tape gives us the best results
Other: No cooling fan with print speeds of 16mm/s as a starting point
Heated Chamber: Recommended, a chamber helps reduce warping and improves layer adhesion
Supports: ThermaX HTS High-Temp Support works ideal for complex, high-temp materials just like this.
Drying Instructions: 120°C for 4 hours.